Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Metal Roof Installation Cost in West Palm Beach?
Metal roof installation in West Palm Beach typically runs between $14,500 and $38,000 for a standard single-family home, with most homeowners paying around $22,000 to $26,000 for a standing seam system on a 1,800 to 2,400 square foot roof. That works out to roughly $8 to $16 per square foot installed, depending on the metal type, panel profile, and how much of the existing roof needs to come off first. At Birchbark Roofing West Palm Beach, you’ll get a written price before any work starts, so you’ll know your exact number before a single panel arrives on your driveway.
This 2026 pricing guide breaks down what you can expect to pay in the West Palm Beach market, why costs vary from home to home, and how to keep your project within budget without cutting corners that matter. We’ll also cover what makes metal roofing worth the investment here specifically, because the math in South Florida looks different than it does in, say, Orlando or Tampa.
Key Takeaways: Metal Roof Costs in West Palm Beach
- Typical range: $14,500 to $38,000 for a full metal roof installation on an average West Palm Beach home.
- Per square foot: $8 to $16 installed, with standing seam on the higher end and exposed fastener panels on the lower end.
- Biggest cost drivers: roof size, metal type (steel vs. aluminum vs. copper), tear-off of the old roof, and underlayment choice.
- Aluminum is common here: coastal salt air makes aluminum a smart pick for homes within a few miles of the Intracoastal or Atlantic.
- Permits and wind codes add cost: West Palm Beach is in a High Velocity Hurricane Zone, so your installation must meet Miami-Dade or FBC HVHZ standards.
- Most common add-on: peel-and-stick high-temp underlayment, which runs $1.50 to $3.00 per square foot extra and is worth every cent in this climate.
- Free estimates: Birchbark Roofing West Palm Beach gives you a written price before any work begins. Call (728) 220-0842 to schedule yours.
Metal Roof Installation Cost Breakdown (2026)
Here’s what a metal roof job actually costs in West Palm Beach, line by line. These numbers reflect what we see on real projects in neighborhoods like Flamingo Park, El Cid, Southland Park, Roosevelt Estates, and the Northwood Hills area. Prices vary with roof complexity, but this gives you a solid baseline.
| Cost Component | Typical Range (West Palm Beach, 2026) | Notes |
|---|---|---|
| Tear-off and disposal of existing roof | $1.50 – $3.50 per sq ft | Higher if you have multiple layers or tile that needs special handling |
| Underlayment (peel-and-stick high-temp) | $1.50 – $3.00 per sq ft | Required by code for many HVHZ applications; worth it for humidity and driving rain |
| Standing seam steel panels (24 or 26 gauge) | $6.50 – $9.50 per sq ft installed | Most popular for residential; hidden fasteners mean fewer leak points |
| Exposed fastener panels (screw-down) | $5.00 – $7.50 per sq ft installed | Lower upfront cost; fasteners may need re-tightening every 10-15 years in this heat |
| Aluminum panels (standing seam) | $8.50 – $12.00 per sq ft installed | Better for homes within 3 miles of salt water; doesn’t rust the way steel can at the coast |
| Copper or zinc panels | $18.00 – $30.00+ per sq ft installed | Rare in West Palm Beach; mostly for architectural homes in El Cid or Prospect Park |
| Flashing, ridge caps, and trim | $800 – $2,500 total | Depends on roof shape; more valleys, chimneys, skylights, and dormers mean more flashing work |
| Roof deck repair or replacement | $2.00 – $4.50 per sq ft (if needed) | Common surprises under old shingles in this humidity; we show you photos before we proceed |
| Permits and inspections | $450 – $1,200 total | City of West Palm Beach building permit plus required inspections |
| Gutter replacement or modification | $6 – $12 per linear foot | Metal roofs shed water fast; gutters may need upsizing or repositioning |
On a 2,000 square foot roof, a full standing seam steel installation with tear-off, premium underlayment, new flashing, and permits lands around $21,000 to $28,000 in West Palm Beach. That’s the number most of our customers in communities like Pineapple Park, Grandview Heights, and Sunshine Park actually end up with. Your home’s number will be specific to your roof, and you’ll have it in writing before we start.
One thing we’re direct about: metal roofing is not the cheapest option upfront. An architectural shingle roof on the same home might run $11,000 to $16,000. But in the West Palm Beach market specifically, metal roofs are now one of the most common choices on home re-roof projects because insurers respond well to them, they handle hurricane season better than almost anything else, and they often outlast two shingle roofs. The math gets clearer when you’re looking at a 40 to 60 year lifespan versus 15 to 20 years for shingles in this sun and salt air.
What Affects Metal Roof Installation Pricing in West Palm Beach
No two roofs in West Palm Beach cost the same, even on the same street. Here are the factors that move your number up or down.
- Proximity to salt water. Homes in neighborhoods like Southland Park or along Flagler Drive sit close enough to the Intracoastal that salt spray is a real factor. Steel will work, but aluminum performs better long-term within about 3 miles of the coast. Aluminum runs $2 to $4 more per square foot, but it won’t develop the pinhole rust that steel can in that environment. If you’re in a salt zone, this is one of the biggest single cost variables.
- Roof complexity and pitch. A simple gable roof in a 1950s neighborhood like Flamingo Park installs faster and costs less per square foot than a roof with multiple valleys, hips, dormers, or a steep pitch. Steep roofs require more safety equipment and slower work, which adds labor cost. Flat or very low-pitch roofs also need special panel profiles or seam details, which changes the math too.
- Number of penetrations. Every plumbing vent, exhaust pipe, skylight, chimney, and solar mount needs custom flashing around it. A roof with 4 penetrations is straightforward. A roof with 14 is a different project. Each penetration adds material cost and labor time, typically $75 to $200 per penetration for proper flashing work.
- Existing roof removal. If you have one layer of shingles, tear-off is straightforward. If you have tile, that’s heavier work and more disposal cost. If you have two layers of shingles or old wood shake, the tear-off cost climbs. We factor this into your written estimate so there’s no surprise line item later.
- Deck condition. The plywood or OSB under your current roof takes a beating in West Palm Beach humidity. Termites, moisture, and age all take a toll. If sections of decking need replacing, that’s $2 to $4.50 per square foot for the affected areas. We won’t know the full picture until the old roof comes off, but we always explain what we’re seeing and show photos before doing anything beyond the agreed scope.
- Wind mitigation requirements. West Palm Beach sits in a High Velocity Hurricane Zone. Your installation has to meet HVHZ code, which affects fastener patterns, underlayment choices, and panel specs. This isn’t optional, and it does add cost versus installations in non-HVHZ parts of Florida. But it also means your roof is engineered for the conditions we actually live with.
Standing Seam vs. Exposed Fastener: The Cost Difference That Matters in West Palm Beach
When you get metal roof quotes in West Palm Beach, you’ll see two main system types. Standing seam is the premium choice: hidden fasteners, clean vertical lines, no screws through the panel face. Exposed fastener systems use screw-down panels with visible fasteners and neoprene washers.
Standing seam for a 2,000 square foot roof here typically runs $17,000 to $28,000 installed. Exposed fastener on the same roof runs $12,000 to $18,000. Both are legitimate metal roofs, but they age differently in this climate. The rubber washers on exposed fastener panels bake in the South Florida sun and can dry out and leak in 10 to 15 years. Standing seam fasteners are hidden under the panels, so they’re not exposed to UV or water at all. For a coastal, hurricane-prone market like West Palm Beach, we generally recommend standing seam for any homeowner planning to stay in the home more than a few years. The upfront difference of $5,000 to $10,000 often pays off in reduced maintenance and fewer callbacks.
That said, exposed fastener is still a solid budget option for detached garages, carports, workshops, or short-term rental properties where the long-term ownership math is different. We’ll show you both numbers when we quote, and explain the tradeoffs honestly. Your written price will cover whichever system you choose, with no pressure to spend more than you need.
West Palm Beach-Specific Costs You Won’t See in a National Estimate
Google a metal roof cost calculator and you’ll get national averages that don’t account for what it means to roof a home in West Palm Beach specifically. Here are the local factors that change the number.
HVHZ code compliance adds real cost. West Palm Beach is in the High Velocity Hurricane Zone, which is a stricter building code than most of the country, and stricter than most of Florida. Your roof has to resist wind uplift of 170 mph or more depending on location and exposure. That means specific fastener counts, specific underlayment, and specific panel gauges. A roof that meets code in Dallas would not pass inspection here. Expect to pay 10% to 20% more than a comparable installation in a non-HVHZ market simply because the materials and fastening standards are higher. This is not an area to cut corners.
Humidity makes underlayment non-negotiable. The heat and humidity in West Palm Beach put a lot of stress on whatever sits between your metal panels and your roof deck. A quality peel-and-stick high-temp underlayment creates a secondary water barrier and handles the thermal movement of metal panels. It costs more than basic felt or synthetic underlayment, but it’s the standard we recommend on every metal roof we install here. Replacing underlayment early because you saved $2,000 at installation is a painful lesson.
Coastal insurance discounts can offset the higher cost. Many West Palm Beach homeowners see meaningful wind mitigation credits on their homeowners insurance after installing a metal roof. Insurers recognize that a properly installed standing seam metal roof performs better in hurricane conditions. The discount varies by carrier and policy, but annual savings of $400 to $1,200 are common for homes in HVHZ zones. Over 20 years, that’s $8,000 to $24,000 back in your pocket, which effectively closes much of the gap between metal and shingles.
Urban permitting moves at its own pace. The City of West Palm Beach building department processes roof permits through a standard review path, and your contractor needs to file the right HVHZ product approvals with the application. This adds administrative time and cost versus unincorporated county work. At Birchbark Roofing West Palm Beach, we handle the permit application, the product approvals, and the scheduling of inspections. You’ll see the permit fee as a line item on your written estimate, not as a surprise after the fact.
How to Save on Metal Roof Installation
Metal roofing is a significant investment, and there are legitimate ways to keep your cost down without ending up with a roof you’ll regret. Here’s what actually works in the West Palm Beach market.
Get the deck inspected before you commit. If your roof deck is in poor condition, you want to know that before you’re mid-project. Paying for a roof deck inspection before the tear-off can save you from surprise costs later. We’ll look at what’s visible from the attic during our estimate so our written price reflects reality, not a best-case scenario.
Choose the right metal for your location. Don’t overpay for aluminum if you’re 10 miles inland in a neighborhood like Westgate or Plantation Isles, where salt exposure is minimal. And don’t underpay for steel if you’re within sight of the Intracoastal. Getting the right metal for your actual location is the single smartest money decision in this category. We’ll show you both options with honest guidance on which makes sense for your address.
Time your project, but don’t chase storms. Roofing demand in West Palm Beach spikes after hurricanes and big summer storms, which drives pricing up and availability down. If you can plan your re-roof for the slower season (typically late fall through early spring), you may have more scheduling flexibility and a smoother experience. That said, we never recommend waiting if your current roof is compromised. An active leak costs more than any seasonal price difference.
Bundle the roof with other envelope work. If you’re also considering gutters, soffit repairs, or skylight replacement, combining them into one project often costs less than scheduling them separately. One mobilization, one permit, one crew visit. If your fascia or soffit needs work, doing it during the re-roof is almost always more cost-effective than tackling it later.
Claim the wind mitigation discount. After your metal roof is installed, ask your insurer to re-run your wind mitigation credits. Many West Palm Beach homeowners leave hundreds of dollars a year on the table because they never update their policy. We’ll provide the documentation you need for the wind mitigation inspection.
And here’s the easiest one: get a written estimate from us before you decide anything. Call (728) 220-0842 and we’ll walk your roof, answer your questions honestly, and give you a written price in dollars. There’s no obligation, and the estimate is free.
Why Metal Roofs Perform Well in West Palm Beach’s Climate
West Palm Beach gets about 62 inches of rain a year, and most of it arrives in June through October as intense afternoon thunderstorms. The sun is relentless. The humidity is punishing. And between June and November, we all watch the tropics. This is a genuinely harsh environment for a roof, and metal handles it better than most alternatives.
Metal sheds water efficiently because the panels are large and the seams are engineered. The thermal movement that happens when a black asphalt roof hits 160 degrees in August is different on a metal roof, especially a lighter-colored one that reflects more of the sun’s energy. That reflective property matters in West Palm Beach, where cooling costs are a year-round reality. A metal roof with a reflective coating can reduce the heat entering your attic enough to notice on your FPL bill.
During hurricane season, the performance difference is structural. Standing seam metal roofs are tested to withstand the uplift and impact demands of the HVHZ. The panels are fastened in a pattern that meets wind load requirements specific to your home’s location and exposure. That’s not marketing language, that’s code. And when the next storm rolls through, you’ll be glad your roof was built to the standard West Palm Beach demands.
We should also mention what a metal roof does for the feel of your home after a rainstorm. The sound of rain on a metal roof is different. Over a solid roof deck with proper underlayment, it’s a low, even patter rather than a tin-can rattle. Some homeowners in neighborhoods like Old Northwood and Lake Clarke Shores tell us they love it. If noise is a concern, talk to us during the estimate and we’ll discuss solid sheathing and underlayment choices that minimize it.
What the Installation Process Looks Like (and What It Means for Your Home)
When Birchbark Roofing West Palm Beach installs your metal roof, we follow the Cedarwell Care Promise on every job. That means a few things you’ll notice right away, especially if you have kids and pets at home.
Our technicians are background-checked and uniformed, so you know exactly who is walking through your door and onto your roof. We wear shoe covers inside your home and lay drop cloths through hallways and workspaces. If your dog needs to stay inside during the project, we coordinate the door schedule with you so the crew isn’t surprising anyone. Where there’s a choice in products, we use pet-safe options. And before the crew leaves each day, we clear the work area, and before the final departure you get a photo of the completed clean-up. That’s the C.A.R.E. standard: Clean up like it’s our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, and Explain the price before the work.
The installation itself follows a predictable sequence: tear-off of the old roofing material, deck inspection, underlayment installation, panel fabrication and fastening, flashing at all penetrations, ridge and trim work, and final inspection. Most West Palm Beach metal roof installations take between 3 and 7 working days depending on roof size and weather. You’ll know the schedule before we start, and we communicate openly if weather changes it.
FAQs – Metal Roof Installation Cost
How much does a metal roof cost for a 1,500 sq ft home in West Palm Beach?
For a 1,500 square foot roof, expect $11,000 to $24,000 in West Palm Beach, with most homeowners landing around $16,000 to $19,000 for a standing seam steel roof with tear-off and premium underlayment. Smaller roofs cost slightly more per square foot because fixed costs like permits, mobilization, and safety equipment spread over fewer square feet. For an exact number on your home, call (728) 220-0842 and we’ll give you a written price free of charge.
Is a metal roof cheaper than shingles in West Palm Beach?
Upfront, no. Metal roofing runs $14,500 to $38,000 compared to $11,000 to $16,000 for architectural shingles on the same home. But over a 40 to 60 year lifespan, metal usually costs less per year of service, especially when you factor in the insurance wind mitigation credits many West Palm Beach homeowners receive. We’ll walk through the full cost comparison for your specific home so you can make the call with real numbers, not sales talk.
How long does it take to install a metal roof in West Palm Beach?
Most residential metal roof installations take 3 to 7 working days from tear-off to final inspection. High-complexity roofs with many penetrations or steep pitches can run longer. Weather during hurricane season can shift the schedule, and we communicate openly when it does. You’ll get a timeline with your written estimate so there’s no ambiguity from day one.
Does metal roof installation require a permit in West Palm Beach?
Yes. The City of West Palm Beach requires a building permit for roof replacement, and your installation must meet High Velocity Hurricane Zone code. Your contractor should handle the permit application, HVHZ product approvals, and inspection scheduling. This is included as a line item in your written estimate. Any contractor who suggests skipping the permit is cutting a corner you’ll pay for later, either in failed inspections or insurance problems.
Can you install a metal roof over my existing shingles?
Technically, code allows in some circumstances, but we don’t recommend it in West Palm Beach’s climate. Installing metal over old shingles traps moisture, hides deck damage, and makes future repairs more complicated. The humidity here means that trapped moisture turns into rot and mold faster than you’d expect. Tear-off costs $1.50 to $3.50 per square foot, and it’s money well spent. Your Metal Roof Installation in West Palm Beach project will last longer and perform better when the deck is exposed, inspected, and properly prepared.
Will a metal roof lower my insurance premium in West Palm Beach?
Many homeowners see meaningful wind mitigation discounts after installing a metal roof, typically $400 to $1,200 per year in annual premium savings depending on your carrier and policy. The discount comes from the HVHZ-compliant installation and the documented wind uplift ratings. We’ll provide the documentation your insurer needs for the wind mitigation inspection. Ask your agent before you sign with any contractor, so you know exactly what credits you qualify for.
Get Your Written Price Before Any Work Begins
There’s a reason birch bark was one of the first roofing materials humans ever used: it’s light, tough, and made to shed water. We kept the name because it reminds us that the best roofing work is simple, honest, and durable. That’s the standard we bring to every metal roof installation in West Palm Beach.
When you call Birchbark Roofing West Palm Beach, a live person answers. Every day, every hour, including nights and weekends. We’ll schedule a roof assessment at a time that works for you, walk the roof ourselves, and give you a written price in dollars before any work starts. That price covers everything: tear-off, underlayment, panels, flashing, permits, and clean-up. No handshake math. No surprise line items. And every job is backed by our 365-Day Done Right Promise: if the work isn’t right, we make it right.
As part of the Cedarwell family of independent roofing businesses since 2000, we hold our crews to the Cedarwell Care Promise on every single job. That means shoe covers at the door, drop cloths through the hallway, all debris cleared and photographed before we leave, and a clean-up photo in your hands before the crew departs. If you have kids, pets, or just a home you love, you’ll notice the difference.
Call (728) 220-0842 today for a free estimate. You’ll get a real number, in writing, from a roofer who treats your home the way you’d treat it yourself.
Written by Erik Lindgren, Owner at Birchbark Roofing West Palm Beach, serving West Palm Beach since 2000.
Pricing reflects the West Palm Beach market as of 2026. Birchbark Roofing West Palm Beach offers free estimates – call (728) 220-0842.
What Our Customers Say
"Roof repair and they were meticulous about the cleanup, tarps over the garden beds and a magnet sweep for nails. We have a dog and a toddler so that mattered a lot."
- Thaddeus Bloom"New roof section and gutter guards. They protected everything below, worked tidy, and did a full nail sweep of the yard and driveway at the end. Thoughtful crew."
- Mariana Lopez"After a storm we had a few spots to fix. They were gentle around the garden, laid tarps, and swept the driveway spotless. You'd never know a roof crew had been here."
- Dawn Kirkland